Baicells CBRS Quick Setup Guide
Step 1 – Enable the SAS Provider in the OMC under Advance
Step 2 – Enable the ENB for SAS DP connectivity and set
install parameters in the ENB using the Multistep Method. Set the PreferFreqHigh to the highest frequency you want to request and the PreferFreqLow to the lowest. In this example, we are requesting 2 10Mhz channels from 3550 to 3570.
The CPI name must not contain spaces. For instance, my name is DavidPeterson
The User ID was selected/given when you signed
up for the SAS. Ours is isp-supplies
Step 3 - Log into your SAS Portal and click on the Ready For CPI Button.
Step 4 - Have your CPI verify the installation parameters and sign the CBSD.
Getting Started With Baicells With Base Station Guide
Base Station Guide Attached Contents 1 GETTING STARTED WITH BAICELLS 1.1 HOW TO SIGN UP FOR A CLOUDCORE ACCESS ACCOUNT 1.2 1.3 HOW TO SET UP A BASE STATION FOR USE WITH CLOUDCORE 1.4 HOW TO ACTIVATE SIM CARDS 1.5 READY TO DEPLOY! GETTING STARTED ...
Using MikroTik LHG as a UE With a Baicells eNodeB
If you want to use a MikroTik LHG CPE as a UE with your Baicells eNodeB, this blog post explains how. Also shown is the tricky nature of inserting the SIM Card in the LHG. LEARN MORE
Baicells Configuration & Network Administration Guide
This is everything you need to know about Baicells including how to add devices to the Cloudcore.
All about the CBRS Band
SPECTRUM FOR THE CITIZENS BROADBAND RADIO SERVICE From the Baicells web site... Read the Blog Post Here The CBRS band – Citizens Broadband Radio Service – is a spectrum plan that tasked the FCC and Department of Commerce’s NTIA sub agency to find ...
How to Install Baicells HaloB for WISP LTE Networks
What is HaloB HaloB is an optional solution for Baicells LTE networks to increase the reliability and stability of their LTE system when network connectivity challenges occur or during times of maintenance to the Cloud based EPC. Since the EPC is ...