Baicells Configuration & Network Administration Guide
This is everything you need to know about Baicells including how to add devices to the Cloudcore.
Getting Started With Baicells With Base Station Guide
Base Station Guide Attached Contents 1 GETTING STARTED WITH BAICELLS 1.1 HOW TO SIGN UP FOR A CLOUDCORE ACCESS ACCOUNT 1.2 1.3 HOW TO SET UP A BASE STATION FOR USE WITH CLOUDCORE 1.4 HOW TO ACTIVATE SIM CARDS 1.5 READY TO DEPLOY! GETTING STARTED ...
Using MikroTik LHG as a UE With a Baicells eNodeB
If you want to use a MikroTik LHG CPE as a UE with your Baicells eNodeB, this blog post explains how. Also shown is the tricky nature of inserting the SIM Card in the LHG. LEARN MORE
How to Install Baicells HaloB for WISP LTE Networks
What is HaloB HaloB is an optional solution for Baicells LTE networks to increase the reliability and stability of their LTE system when network connectivity challenges occur or during times of maintenance to the Cloud based EPC. Since the EPC is ...
Baicells CBRS Quick Setup Guide
Step 1 – Enable the SAS Provider in the OMC under Advance Step 2 – Enable the ENB for SAS DP connectivity and set install parameters in the ENB using the Multistep Method. Set the PreferFreqHigh to the highest frequency you want to request and the ...
Using Baicells L2 Mode
To change LGW mode, navigate to the Network -> LGW page. In LGW L2 mode, the eNB will create a virtual interface for every UE that attaches. Each virtual interface will then do a DHCP request and create a 1:1 mapping between the UE IP (from Cloud ...