Baicells eNodeB DHCP Server

Baicells eNodeB DHCP Server

This seems confusing to me and to others so to clarify, this DHCP server does not give addresses to UE's on the Wireless Network. It is for giving an address to a connected laptop through the management Ethernet port. Don't confuse this with the LGW IP Pool.

DHCP Server:

2018-07-05_11-35-32.png

LGW IP Pool (Ip's mapped to UE's):

2018-07-05_11-39-53.png

    • Related Articles

    • Using MikroTik LHG as a UE With a Baicells eNodeB

      If you want to use a MikroTik LHG CPE as a UE with your Baicells eNodeB, this blog post explains how.  Also shown is the tricky nature of inserting the SIM Card in the LHG. LEARN MORE

    • Standard Config for Bridged eNodeB and Customer Router

      Settings for the eNodeB Go through normal eNodeB setup from the Baicells manual.  Then make sure these settings are made:     Save everything and reboot. Settings for the UE Log into UE, upgrade to BCE-ODU-1.0.12 and leave everything at default ...

    • DHCP Option 43

        Need to convert an IP address to hex for DHCP Option 43? Here is a link that does that for you: http://www.ipaddresslocation.org/convertip.php  

    • Getting Started With Baicells With Base Station Guide

       Base Station Guide Attached Contents 1 GETTING STARTED WITH BAICELLS 1.1 HOW TO SIGN UP FOR A CLOUDCORE ACCESS ACCOUNT 1.2  1.3 HOW TO SET UP A BASE STATION FOR USE WITH CLOUDCORE 1.4 HOW TO ACTIVATE SIM CARDS 1.5 READY TO DEPLOY! GETTING STARTED ...

    • How to Install Baicells HaloB for WISP LTE Networks

      What is HaloB HaloB is an optional solution for Baicells LTE networks to increase the reliability and stability of their LTE system when network connectivity challenges occur or during times of maintenance to the Cloud based EPC.  Since the EPC is ...