CPE7000 Password

CPE7000 Password

From ISP Supplies Customer Learning Center
 

default "operator" password changed as of firmware 01.01.02.082. Pre-.82, it is 'wimax', and post-.82, it is 'Telrad4G' (case-sensitive).

 
    • Related Articles

    • Upgrading Baicells LTE UE's and eNB's

      For the base station: To upgrade the firmware, please follow the following steps: 1. Log into the eNB's web gui 2. Go to "System" 3. Go to "Upgrade" 4. Click "Choose file" and choose the firmware file. 5, Click "Upgrade Now". For UE: Log into CPE ...
    • Getting your Redline TVWS Basestation online for the first time.

      The Redline UHF TV Whitespace (TVWS) system is quite a bit different than most fixed wireless systems you might be used to using.  The system HAS to have a working GPS on all units.  The PMP SC (Base station) can be identified by it's beige color ...
    • Grandstream P-Codes

      P-Code Retrieval One of the most common ways to generate a P-Code Template is to configure the phone using the webUI and exporting the phones configuration, which can be found under Maintance > Upgrade and provisioning. If you are unsure of a P-Code ...
    • 3.65 GHz Channel Planning

      This chart helps demonstrate the frequency combinations available for 3.65 GHz spectrum to ensure the best frequency utilization and ensure CPE's don't see interference from multiple sectors. With only 50 MHz of spectrum, the combinations are ...
    • Using MikroTik LHG as a UE With a Baicells eNodeB

      If you want to use a MikroTik LHG CPE as a UE with your Baicells eNodeB, this blog post explains how.  Also shown is the tricky nature of inserting the SIM Card in the LHG. LEARN MORE