DHCP Option 43

DHCP Option 43


Need to convert an IP address to hex for DHCP Option 43? Here is a link that does that for you:


    • Related Articles

    • Baicells eNodeB DHCP Server

      This seems confusing to me and to others so to clarify, this DHCP server does not give addresses to UE's on the Wireless Network. It is for giving an address to a connected laptop through the management Ethernet port. Don't confuse this with the LGW ...
    • Grandstream P-Codes

      P-Code Retrieval One of the most common ways to generate a P-Code Template is to configure the phone using the webUI and exporting the phones configuration, which can be found under Maintance > Upgrade and provisioning. If you are unsure of a P-Code ...
    • Telrad Public to customer setup using breezeview

        Telrad Public to customer setup using breezeview In BreezeView to enable the next field you have to hit TAB key on keyboard to get out of name field and it will unlock the rest of the fields. 1. Go to the EPC and expand the Service Authorization ...
    • Telrad L2 PDN Howto

        Follow these steps in Breeze view. Once done, create a corresponding VLAN on your router facing the EPC with DHCP Server for this customer's router. That's it!      
    • Basic Script to Configure a Blank MikroTik Router

        I have developed a script you can simply paste into the router and it will configure everything for you and get you started on the right track. /ip address add address= disabled=no interface=ether2 add address= ...