POE Crossover for Stations and Cameras or AP's

• Related Articles

• airMAX - How to Configure a PoE Bridge

  Overview This article demonstrates four different configurations for a PoE Bridge with airMAX devices. NOTES & REQUIREMENTS: This article covers different possible combinations using a NanoStation 5AC as an example. Different devices have different ...

• Installing the TP-Link EAP225 WiFi Access Point and JetStream T1600G-28PS POE Switch

  This application involves delivering internet access to a number of executive office suites. The MDF/IDF was located in one set of suites. My design criteria were as follows: 1. Simplicity, no controller on site for WiFi. Set it and forget it. 2. Use ...

• Build a WISP

    Article courtesy of wiki.ubnt.com Contents 1 Introduction 2 Legal and commercial requirements 3 BaseStation 4 Minimum requirements: 5 A CALEA compliant system (in the U.S.) 6 STEP BY STEP 7 AP  Wireless Page 8 Clients 9 CPE- Wireless Page 10 CPE- ...

• Registering Baicells LTE in the FCC’S ULS

  Step by step guide HERE

• Bridge Two MikroTik Devices

    Need a wireless bridge between two buildings or a quick backhaul link? Have a pair of RouterBoard 411?s with their original Level 3 license lying around? Then great, you have exactly what you need to build a point to point link. ?What? I thought I ...