Telrad L2 PDN Howto

Telrad L2 PDN Howto


Follow these steps in Breeze view. Once done, create a corresponding VLAN on your router facing the EPC with DHCP Server for this customer's router. That's it!






    • Related Articles

    • Telrad Public to customer setup using breezeview

        Telrad Public to customer setup using breezeview In BreezeView to enable the next field you have to hit TAB key on keyboard to get out of name field and it will unlock the rest of the fields. 1. Go to the EPC and expand the Service Authorization ...
    • Telrad Manuals

        CPE7000 Outdoor Manual: 151201_Dual_Mode_CPE7000_Outdoor_User_Manual.pdf Compact QIG: Compact_QIG_216048.pdf Configuring the LTE UE: Configuring_the_LTE_UE.pdf Telrad Virtual EPC Manual: Telrad_Virtual_EPC_6.0_User_Manual.pdf Using the Provisioning ...
    • Netonix WISP-Switch & Mikrotik Router on a Stick Howto

      In this example we will build a router on a stick. We want to manage the switch from port 8 using inter vlan routing on the router. Here is the physical setup: 1. To configure the switch, set an IP address of on your laptop and log ...
    • Telrad 3.65 FCC Application

        Here is the information for an FCC ASR 3650-3700 MHz filing. This assumes the 65 degree 4-port, dual slant Alpha sector. Antenna manufacturer: Alpha Wireless Antenna Model Number: AW3023 Antenna gain: 18.0 dBi Beamwidth: 65deg Azimuth: 70.0deg ...
    • MikroTik RBwAPR-2nD&R11e-LTE-US with LTE Modem With Verizon HowTo

      I grabbed one of these RBwAPR-2nD&R11e-LTE-US off the shelf today at ISP Supplies  and wanted to see how hard it would be to make it work with Verizon Wireless.  I had an active SIM card from an old Verizon Jetpack to use with it.  I inserted the SIM ...