To add UE's to your Baicells Cloudcore Account to monitor with TR-069

To add UE's to your Baicells Cloudcore Account to monitor with TR-069

To see the CPEs on OMC you have to add them to the OMC, 

With the release of some recent firmware (version BCE-ODU-1.0.8) comes two easy ways for operators to add their UEs to the OMC.

  1. Begin by logging into your CloudCore Account
  2. Find your CloudKey Number in the top right corner. This number is unique to every operator’s account.
  3. Next, go to the the UE web GUI
  4. Click the “System” tab located on the left
  5. Click TRO69
  6. Enter your CloudKey in the box marked “CloudKey”
  7.  Click submit and in a few minutes, once the UE attaches to the eNodeB, it will appear in CPE monitor in the OMC. Reboot is not required for this field to take effect.

Alternatively, you can use the device manager within the OMC to add devices

  1. Login to your OMC account
  2. Click on System/Device Management
  3. Click +Add in the in the top right corner
  4.  A popup will appear to insert the UE MAC address. Fill it in and the UE device will be added to your account.

    • Related Articles

    • Using MikroTik LHG as a UE With a Baicells eNodeB

      If you want to use a MikroTik LHG CPE as a UE with your Baicells eNodeB, this blog post explains how.  Also shown is the tricky nature of inserting the SIM Card in the LHG. LEARN MORE

    • Getting Started With Baicells With Base Station Guide

       Base Station Guide Attached Contents 1 GETTING STARTED WITH BAICELLS 1.1 HOW TO SIGN UP FOR A CLOUDCORE ACCESS ACCOUNT 1.2  1.3 HOW TO SET UP A BASE STATION FOR USE WITH CLOUDCORE 1.4 HOW TO ACTIVATE SIM CARDS 1.5 READY TO DEPLOY! GETTING STARTED ...

    • How to enter and activate SIM cards with Baicells LTE

      To Enter a 100 Pack of SIMs If you buy a 100 pack of SIMs, you can add the code from the box to your BOSS to get them associated with your network.  Remeber to add them as a subscriber once they have been associated with your account by following the ...

    • Upgrading Baicells LTE UE's and eNB's

      For the base station: To upgrade the firmware, please follow the following steps: 1. Log into the eNB's web gui 2. Go to "System" 3. Go to "Upgrade" 4. Click "Choose file" and choose the firmware file. 5, Click "Upgrade Now". For UE: Log into CPE ...

    • Baicells Configuration & Network Administration Guide

      This is everything you need to know about Baicells including how to add devices to the Cloudcore.