Using MikroTik LHG as a UE With a Baicells eNodeB

Using MikroTik LHG as a UE With a Baicells eNodeB

If you want to use a MikroTik LHG CPE as a UE with your Baicells eNodeB, this blog post explains how.  Also shown is the tricky nature of inserting the SIM Card in the LHG.

LEARN MORE

    • Related Articles

    • Using Baicells L2 Mode

      To change LGW mode, navigate to the Network -> LGW page. In LGW L2 mode, the eNB will create a virtual interface for every UE that attaches. Each virtual interface will then do a DHCP request and create a 1:1 mapping between the UE IP (from Cloud ...

    • How to Install Baicells HaloB for WISP LTE Networks

      What is HaloB HaloB is an optional solution for Baicells LTE networks to increase the reliability and stability of their LTE system when network connectivity challenges occur or during times of maintenance to the Cloud based EPC.  Since the EPC is ...

    • Upgrading Baicells LTE UE's and eNB's

      For the base station: To upgrade the firmware, please follow the following steps: 1. Log into the eNB's web gui 2. Go to "System" 3. Go to "Upgrade" 4. Click "Choose file" and choose the firmware file. 5, Click "Upgrade Now". For UE: Log into CPE ...

    • LTE Customer Feedback

      This page contains actual feedback from our customers on their testing of the Telrad Compact 1000. Everything I'm going to talk about is UE in one hand, laptop in the other sitting in the cab of an F-150. All speed tests were to the Dallas Speakeasy ...

    • LTE Terms

        LTE Terminology This page on LTE terminology covers LTE and LTE advanced technology related terms. eNB or eNodeB It is similar to Base station which is used in GSM networks. Also called as eNodeB. UE: It is similar to mobile subscriber. OFDMA: ...