Recent Articles
Protective Angle Method of Grounding
The protective angle method is one of the three routes for lightning protection system design defined by IEC 62305, the international standard for lightning protection design. After the first step of determining the class of lightning protection ...
Grounding Wireless Equipment
One of the most important tasks for a WISP is proper grounding of all hardware, buildings and towers. Many people new to being a WISP often overlook this critical step in deployment or under doing the proper grounding necessary. This almost always ...
Having trouble accessing a default configuration page on wireless hardware?
One of the most frequent issues that I receive is the inability to access the default login page on new equipment. Sometimes the page comes up but the username and password do not work or even not at all. Web Page Inaccessible/"Easy" Configuration ...
Baicells CBRS Quick Setup Guide
Step 1 – Enable the SAS Provider in the OMC under Advance Step 2 – Enable the ENB for SAS DP connectivity and set install parameters in the ENB using the Multistep Method. Set the PreferFreqHigh to the highest frequency you want to request and the ...
airMAX - How to Configure a PoE Bridge
Overview This article demonstrates four different configurations for a PoE Bridge with airMAX devices. NOTES & REQUIREMENTS: This article covers different possible combinations using a NanoStation 5AC as an example. Different devices have different ...