Ubiquiti HowTo Articles
airMAX - How to Configure a PoE Bridge
Overview This article demonstrates four different configurations for a PoE Bridge with airMAX devices. NOTES & REQUIREMENTS: This article covers different possible combinations using a NanoStation 5AC as an example. Different devices have different ...
How to Bridge Two Ubiquiti Devices
This guide will walk you through the process of configuring two Ubiquiti devices to be a transparent wireless bridge. For the older M Series Radios: The article is a PDF file you can download from HERE . For the newer AC Radios Running AirOS 8 The ...
How to Upgrade a UniFi Controller on Linux
I have used the Ubiquiti UniFi product since it first came out and have watched the evolution with excitement because I believe the AP/Controller concept is the future of indoor wireless. Ubiquiti has done it in their usual fashion by making ...
How to Upgrade Ubiquiti Firmware
Firmware Upgrade process Contents: This guide describes the Firmware Upgrade process of AirOS. Requirements: UBNT devices to upgrade. Ethernet Cable. A PC or Laptop always configured to access the units (es. [1] ). IMPORTANT! Do not switch off, do ...
Ubiquiti airVision NVR-C Worth The Money
This is my quick review of the airVision NVR-C I plugged the Ubiquiti airVision-C into power, added a cat 5 cable and launched my discovery tool which found it immediately. I launched my web browser (Safari) and logged into it, answered a few ...
POE Crossover for Stations and Cameras or AP's
POE Crossover for Stations and Cameras or AP's
Ubiquiti AirMax Device Interoperability and DFS Availability
Item DFS Approved Backwards Compatible DFS notes Ubiquiti : AF-2X(US) NA NA Ubiquiti : AF-3X(US) NA NA Ubiquiti : AF-5X(US) Yes No Ubiquiti : BulletM2-HP(US) NA NA Ubiquiti : BulletM5-HP(US) No Yes Ubiquiti : IS-5AC(US) No Yes In process, ...
Ubiquiti AF11FX Link Will Not Come Up (no link)
We have seen many instances of AF11 links that will not come up. Typically the issue is the Duplexors being installed wrong. In one case, the Duplexers were actually labeled wrong so it was not the user's fault! Here is a low band example for a ...